Sanding belt, fabric VSM KK791Y
Cloth-backed sanding belt corundum VSM KK791Y
SNDBL-CLTH-VSM-KK791Y-150X2500MM-K800
Register now and access more than 125,000 products
Ideally suited for flat grinding operations or for reciprocating grinding welded pipes. Achieves a more uniform grinding finish and a more even surface roughness, especially when processing softer steel grades.
- An extended belt life leads to higher productivity
- Uniform surface quality with a consistent grinding finish and constant removal rate, especially in flat grinding applications
- Improved grain adhesion guarantees full utilisation of the granulate
- Fewer tool changes reduce grinding costs and facilitate increased process stability
Datasheets(X)
Width x length | 150 mm x 2500 mm |
Grid size | 800 |
Material of abrasive medium | Aluminium oxide |
Backing material | Y-polyester |
Last viewed
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Safety boots, S4
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
HSCo end mill, long, centre-cutting DIN 844L
Repair hose line, NBR/CR With medium permeation for non-fuel-carrying applications
Short sanding belt Klingspor LS 309 XH
Screw plug GPN 700 For pipe thread
EPS profile thumbturn cylinder
Double open-end wrench, ultra-thin