Sanding belt, fabric VSM XK870F
Sanding belt ceramic abrasive grain VSM XK870F
SNDBL-CLTH-VSM-XK870F-300X3500MM-K320
Register now and access more than 125,000 products
XK870F is highly abrasive even with low contact pressure. The highly flexible backing adapts well to narrow radii and fine contours.
- Self-sharpening effect results in very high removal rate thanks to constant regeneration of sharp grain tips
- Cooler grinding and extended service life due to the active grinding extra layer VSM TOP SIZE
- High wear resistance
- Ideal for contour-grinding due to the very flexible cotton backing
Datasheets(X)
The sanding belt is particularly suitable for workpieces with very hard surfaces, such as non-ferrous metals, stainless steels or super alloys. Also ideal for robot applications or hand sanding operations on jaw stands, such as pre-sanding blades.
Width x length | 300 mm x 3500 mm |
Grid size | 320 |
Material of abrasive medium | Ceramic / aluminium oxide |
Backing material | F-Cotton |
Last viewed
Adapter For AMO®-Therm Mini stand-off installation system
Taper-grooved dowel pin DIN 1472, A1 stainless steel, plain
Identification rings, PVC
Shim ring DIN 988, zinc-plated steel
Low-cut safety shoes, S3
Three-punch expander pliers Three-punch pliers
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Drawer divider set BASIC, 12-compartment
Tab washer, external tab DIN 432, zinc-plated steel, blue passivated (A2K)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO