Sanding belt, wide VSM KK718X
Wide sanding belt metal VSM KK718X
SNDBL-CLTH-VSM-KK718X-630X2620MM-K600
Register now and access more than 125,000 products
KK718X is ideal for grinding tubes and rods in the centreless process or wire finish on planetary grinding machines; at medium to high contact pressure. The long-term abrasive also boasts a uniform grinding finish and uniform surface roughness over the entire, very long service life when sanding flat steel in a continuous process.
- Reduced sanding costs due to lower tool consumption and fewer tool changes
- For uniform workpiece surfaces and roughness depths with constant removal
- Abrasive additives in the second layer of cover bonding ensure higher removal
Datasheets(X)
Width x length | 630 mm x 2620 mm |
Grid size | 600 |
Backing material | X-polyester |
Material of abrasive medium | Aluminium oxide |
Last viewed
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 10.9, plain
Aluminium eccentric lever with male thread
Countersunk head screw with square neck DIN 608, steel 10.9, zinc flake (ZFSHL)
Hexagonal bolt
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
High-visibility work dungarees
Cylindrical pin, hardened DIN 6325, steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)