Sanding block Klingspor SK 500
Sanding sponge corundum SK 500 Klingspor
SANDBLCK-KLINGSPOR-125279-70X100MM-G60
Register now and access more than 125,000 products
With its dense scatter type and corundum grain type, the SK 500 has an excellent removal rate, meaning the sanding block can be used for lacquer, paint or filler. The abrasive is particularly useful in the fine finishing of surfaces. Furthermore, the material is robust and washable and can be reused.
The SK 500 sanding block can be used for flat and profiled workpiece surfaces. Thanks to the flexible foam core, it can be used for many applications. Even the surfaces of complex profiled workpieces can be reliably sanded. Both dry and wet sanding is possible with this abrasive.
Datasheets(X)
Length | 100 mm |
Width | 70 mm |
Height | 25 mm |
Grid size | 60 |
Last viewed
pias® drilling screw, raised countersunk head with AW drive
Dry sandpaper roll Mirka Jepuflex Antistatic
Bottom bracket latch for insect protection
Screw with flattened half round head and hexagon socket
A2 stainless steel cross handle with female thread, blasted
Protection pad for adhesive backing pad Mirka 8295611111 protection pad, 57 holes
Display shelf for starter battery, DURACELL®
Countersunk rivet
Work jacket
Hexagonal bolt