Sanding disc, fleece Klingspor MFW 600
Non-woven abrasive disc Klingspor MFW 600
FLCORBSANDR-KLINGSPOR-337950-D150-FINE
Register now and access more than 125,000 products
This is the specialist for welding seam machining on stainless steel. The four different degrees of fineness cover the entire range of machining operations, from adjusting the grinding finish through to the finish cut. The abrasive grain made from silicon carbide is bonded to the polyamide fibre fleece with synthetic resin.
Datasheets(X)
This high-performance fleece disc is intended for use on a fillet weld sander. The best results are achieved in the mid speed range, i.e. at 5000-7500 rpm. Especially when machining stainless steel e.g. in container or tank construction, this tool is used for finishing as well as for eliminating small defects on the surface. It is also often used for matting or burnishing.
Diameter (Ø) | 150 mm |
Drill hole | 25.4 mm |
Design | Fine |
Colour | Grey |
Suitable for | Fillet weld grinder |
Last viewed
Vulcanised fibre disc Klingspor FS 764 ACT
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Thread die HSS DIN EN 22568 for standard metric ISO threads
Stud with threaded end ≈ 2d
Blow-out gun With standard short nozzle
Sport Crux S1P ESD safety shoes
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hook-and-loop fastening grinding plate For random orbital sanders ETS 150-3.0-E Power and 150-5.0-E POWER
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain