Sanding disc, fleece Klingspor MFW 600
Non-woven abrasive disc Klingspor MFW 600
FLCORBSANDR-KLINGSPOR-342237-D125-FINE
Register now and access more than 125,000 products
This is the specialist for welding seam machining on stainless steel. The four different degrees of fineness cover the entire range of machining operations, from adjusting the grinding finish through to the finish cut. The abrasive grain made from silicon carbide is bonded to the polyamide fibre fleece with synthetic resin.
Datasheets(X)
This high-performance fleece disc is intended for use on a fillet weld sander. The best results are achieved in the mid speed range, i.e. at 5000-7500 rpm. Especially when machining stainless steel e.g. in container or tank construction, this tool is used for finishing as well as for eliminating small defects on the surface. It is also often used for matting or burnishing.
Diameter (Ø) | 125 mm |
Drill hole | 22 mm |
Design | Fine |
Colour | Grey |
Suitable for | Fillet weld grinder |
Last viewed
Safety sandals, S1P
Adjustable L-shaped sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Mortar bucket Square
Special 2C adhesive set 5 pcs
Hexagonal bolt with thread up to the head
Reference book For load securing
Drying aid
Hose clamp with spring package W4, BASIC-Line
Steering wheel For Compact workshop trolley, swivelling with brake