Sanding sleeve Klingspor CS 310 X
Fabric sanding sleeve corundum Klingspor CS 310 X
WIDEBELT-KLINGSPOR-28188-D13XB25-G50
Register now and access more than 125,000 products
The CS 310 X abrasive sleeve has been developed by Klingspor for universal use in metalworking. These abrasive sleeves can also be used for plastic and wood. They are equally suitable for free-standing machines as for hand-held machines.
Sanding with abrasive sleeves regularly generates high centrifugal forces which place an extraordinary amount of stress on the abrasive. The tear-resistant cotton backing, as support material, provides the necessary strength to allow safe working under these conditions. This abrasive with corundum grain is bound to the support material by a layer of synthetic resin.
Datasheets(X)
Diameter x width | 13 x 25 mm |
Material of abrasive medium | Corundum |
Backing material | X-cotton fabric |
Colour | Brown |
Grid size | 50 |
Last viewed
Work pullover
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Insert, tapered sealing EN1254, red brass, 4381
Hexagonal bolt with shank
Slotted set screw with truncated cone DIN 551, steel 14H, zinc-plated blue passivated (A2K)
Hexagon Socket Head Cap Screw
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Work trousers
Clip cover For Z60-H/Z100-H sliding door fitting set