Sanitary power cleaner
Sanitary power cleaner
SANICLNR-POWER-1LTR
Register now and access more than 125,000 products
- Powerful cleaner for removing stubborn dirt such as lime, soap residue, fat and urine scale
- Has a deodorising effect
- Cost-effective to use
- Leaves a pleasant, hygienic fresh scent
- Particularly effective for deposits of limestone and urine scale
Always pre-moisten non-acid-resistant joints before cleaning. After cleaning floors, walls and fixtures, always go over with clean water. Do not apply sanitary power cleaner to marble, enamel or surfaces sensitive to acids. Test material compatibility in an inconspicuous area.
Datasheets(X)
Can be used on all acid-resistant surfaces such as sinks, fittings, plastic surfaces, shower and bath tubs, toilet/urinal basins, wall and floor tiles.
- Maintenance cleaning: Dilute 0.5–1% (40–80 ml/8L cold water).
- Basic cleaning: Dilute 2% (160 ml/8L cold water).
- In case of extreme soiling or heavy lime deposits, apply undiluted and then wipe with clean water.
Contents | 1 l |
Container | Bottle |
Smell/fragrance | Fruity |
Colour | Red |
Chemical basis | Surfactans |
Density/conditions | 1.061 g/cm³ / at 20°C |
Shelf life from production/conditions | 36 Month / frost-free storage area |
Bio-degradable | Yes |
AOX-free | Yes |
Last viewed
Insulated corrugated pipe, slit
Crimp and solder connector set BEST 107 pieces
Threaded rod DIN 976, A2-70 stainless steel, shape A
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Quick Fresh Turbo deodoriser
VDE screwdriver, flat slotted
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly