Satin-finish wheel brush for wood crimped, with hole
Stranded wire brush
BRSH-STRAWRE-SATNFINR-(MS)-100X70X19MM
Register now and access more than 125,000 products
- Excellent for surface structuring work on large-scale workpieces
- Increased brushing effect
- Additional holding of the wires through the stranded construction
- For use on angle grinders
- Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.
- Can be used on all standard brush sanders.
- Always wear safety goggles and safety gloves when working with machine brushes!
Datasheets(X)
- Deburring and removal of rust and dirt
- Brushing out the soft annual rings in coniferous wood
- Roughing of the surface of hardwoods
Diameter x width x drill hole (DxBxA) | 100 x 70 x 19 mm |
Material | 0 - not applicable |
Design | Corrugated |
Wire diameter | 0.25 mm |
Aggressiveness | Hard |
Suitable for satin finisher (point system) | 4 of 4 points |
Max. rotation speed | 8000 rpm |
EN standard | 1083-2 |
Last viewed
AL 900 door handle on inner plate With CK punch
Tapping screw, raised countersunk head
Hexagonal bolt
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
EPS profile thumbturn cylinder
Work overall
pias® drilling screw, flat head with AW drive
Aerated concrete screw EUROFAST ® GBS-6
S3 safety shoe Base B0676C
Welding plate Part 1 — long version, type SPV