Satin-finished powder-coated sheet steel print sheet for Prusa MK4S and CORE One

Overview:

• The heat bed is equipped with embedded magnets that can also withstand higher temperatures


• The magnets are strong enough to firmly hold removable spring steel sheets in place


• The printing properties of the satin-finished sheet are somewhere between smooth and textured print sheets


• The powder-coated surface with slightly textured, matt finish provides optimal adhesion, particularly when printing with PLA and PETG


• The print sheet is fully compatible with a wide range of standard and special filaments, such as ABS, ASA, FlexFill 98A and polycarbonate


• Most materials can be reliably printed without a separating layer such as adhesive


• Although polycarbonate prints especially well on satin-finished materials, it is advisable to apply a thin layer of glue stick when regularly printing PC to avoid damaging the sheet

Advantages

• Suitable for PLA and for PETG


• Slightly textured surface


• Glue stick not required for PETG


• Wide range of supported filaments including modern materials such as PC blend


• Easy maintenance and good adhesion properties

Disadvantages

• Acetone leads to quick degradation of the surface


• Printing ASA or PC blend requires a brim/skirt/shield around the print


• Do NOT use sharp metal objects (e.g. a spatula) to remove the print!