Welcome to Würth Aerospace Solutions For trade customers only
Scaffolding anchor system - ANC-FRM-PLA-14X135

Scaffolding anchor system

Scaffolding anchor system
ANC-FRM-PLA-14X135

Art.-no. 0912014135
EAN 4011231856188
All versions
Prices for customers after login
Scaffolding anchor system

Art.-no. 0912014135

Prices for customers after login
Quantity
PU
x 50 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

GR 14 mm scaffold anchors for fastening free-standing scaffolding (must be used with eyelet screw GS 12)
  • Anchor sleeve and eyelet screw are perfectly coordinated to guarantee maximum safety

  • Anchor made of high-quality polyamide (nylon)

  • Polyamide anchors may be used only once to ensure maximum load capacity
Notice
  • The eyelet screw must be screwed into the anchor until the screw tip protrudes from the front of the anchor by at least 1x the screw diameter. This is the only way to achieve the maximum load capacity

  • The polyamide (nylon) anchor must not be reused

  • Drill hollow block brick without impact mechanism

  • Using carbide multi-purpose drill bits allows for a much better drill hole to be produced in perforated brick and much higher extraction values

  • Hollow block brick should generally be drilled without an impact mechanism
Drill hole
Clean the drill hole
Install anchor
Screw in securing element
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • When attaching free-standing scaffolding, GR Ø 14 must be used with eyelet screw GS 12

  • Suitable for anchoring in solid materials, concrete, solid brick and rock, excluding lightweight concrete

  • For perforated brick and lightweight or aerated concrete, we recommend using our HBR Ø 14 plastic frame anchor (large expansion zone) in conjunction with a GS 10 eyelet screw, and using a carbide multi-purpose drill bit for the drill hole to ensure optimum holding power

Anchor diameter

14 mm

Anchor length (l) (l)

135 mm

Embedding depth (h nom)

70 mm

Nominal drill-bit diameter (d 0)

14 mm

Drill hole depth (h 1)

80 mm

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X120

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X160

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X190

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X230

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X300

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X350

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Eyelet screw GS
Eyelet screw GS

BLT-EYE-FRAME-(A0K)-4.8-12X90

For attaching scaffolding in conjunction with suitable plastic anchors. Steel 4.8, zinc plated blue
x 25 pcs
Cover cap AK for GR 14 scaffolding anchors
Cover cap AK for GR 14 scaffolding anchors

CAP-F.ANC-D14MM

Paintable, UV-resistant cover for GR scaffolding anchors
x 50 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details