Screw extractor
Screw extractor
EXTR-SCR-(M3-M6)
Register now and access more than 125,000 products
Datasheets(X)
Drill a hole into the part being removed as shown in the table and screw in the extractor anti-clockwise. Further tightening unscrews the broken part without damaging the thread.
Suitable for screw | 1/8 inch - 1/4 inch |
Length | 50 mm |
Drill diameter | 1.8 mm |
Size | 1 |
Material | Chrome-vanadium steel |
Last viewed
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut
Sandpaper disc Klingspor PS 22 K
Straight male fitting ISO 8434-1, stainless steel 1.4571, metric male thread with seal
Hexagon nut, inch
Low-cut safety shoes, S1P
T-piece branch pipe, enlarged EN10242 B1, hot-dip galvanised malleable iron
Work dungarees
SNAP marker
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Solid carbide radius cutter, short, triple blade