Screw for ISO P clamping system
Screw for ISO P clamping system
AY-SCREW-ISO-P-CLMPSYS-VHX1027N
Register now and access more than 125,000 products
Datasheets(X)
Thread type x nominal diameter | M10 |
Pitch | 1 mm |
Length | 27.2 mm |
Shaft length | 14.4 mm |
Internal drive | HS5 |
Drive type | Hexagon socket |
Outer diameter | 9.8 mm |
Nominal diameter | 10 mm |
Last viewed
ASSY®plus 4 CSMP SPECIAL universal screw Hardened zinc-plated steel partial thread countersunk head
Clamp for ISO M clamping system
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
STC end mill Speedtwister-Universal, long, optional, five cutting edges, uneven angle of twist gradient, 3xD
Polishing pads
Electronic flat nose pliers
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Square solid spindle 8 mm
System case 8.4.3