Screw for ISO P clamping system
Screw for ISO P clamping system
AY-SCREW-ISO-P-CLMPSYS-VHX1236N
Register now and access more than 125,000 products
Thread type x nominal diameter | M12 |
Pitch | 1 mm |
Length | 36 mm |
Shaft length | 18.3 mm |
Internal drive | HS5 |
Drive type | Hexagon socket |
Outer diameter | 11.8 mm |
Nominal diameter | 12 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Low-cut safety shoes, S2 Uvex 1 Sport Hygiene 6580
Table leg
Wire end ferrule with plastic sleeve
Single anchor point for concrete With 360° fixing bolt anchor
Drill hole marker for marking where access is restricted
Low-cut safety shoes, S1 Steitz VD PRO 1440 ESD
WÜPOFAST® zinc-plated yellow chipboard screw steel, zinc-plated yellow, partial thread, countersunk head, PZ
Print material FFF PETG Material4Print
Low-cut safety shoes, SB Steitz VD 4062 ESD
Metric combination wrench with POWERDRIV®
