Screw for ISO S clamping system
Screw for ISO S clamping system
AY-SCREW-ISO-S-CLMPSYS-FTKA03508
Register now and access more than 125,000 products
Datasheets(X)
Thread type x nominal diameter | M3.5 |
Pitch | 0.6 mm |
Length | 8.4 mm |
Head diameter | 5.5 mm |
Internal drive | TX15 |
Drive type | Internal TX |
Countersink angle | 60 Degree |
Nominal diameter | 3.5 mm |
Last viewed
HSS Performance plain stepped twist drill bit
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Rafter nail Zinc-plated, blue passivated (A2K)
Countersunk rivet
Pegboard for RW system wheeled workbench
Ducting clamp Part 2 – Heavy series
Flat cover cap, for hexalobular socket and AW drive
Hexagon nut, inch
Wing nut, Hygienic USIT®
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)