Screw in element GPN 550 Polyethylene (PE-LD), yellow
Sealing plug GPN 550
SEALPLG-GPN550-012-YELLOW
Register now and access more than 125,000 products
Robust:
Thick-walled shank for increased load.
Versatile:
Conical plug for bridging tolerances.
Additional information:
Self-cutting seal for screwing into thread or drill holes for permanent fixture.
Ideal for painting work.
Datasheets(X)
 | |
Suitable for screw thread | M12 |
Outer diameter (d2) | 18 mm |
Min. shaft diameter (B) | 9.3 mm |
Max. shank diameter (C) | 11 mm |
Insertion depth (h1) | 21 mm |
Height (M) | 30 mm |
Other standard | GPN 550 |
Material | LDPE - Low density polyethylene |
Colour | Yellow |
Min./max. temperature resistance | -40 to 60 °C |
Max. short-term temperature resistance | 80 °C |
Last viewed
T-piece, reduced with solder connection EN1254, copper, 5130R
Tapered pin, unhardened
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Pneumatic angle grinder DWS 125 plus
EPS profile thumbturn cylinder
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Rivet nut
Big Bag, mineral wool With skirting and fastener bands
Charger AL-60-AS-LI