Screw-in part, tapered sealing, with male thread EN1254, gunmetal, 4380G
EN1254 gunmetal 4380G
FITT-SCRI-1254-IT-ET-RB-1/4X1/2ZO-4380G
Register now and access more than 125,000 products
- For universal use in various areas of application, e.g. shipbuilding and the mechanical engineering industry
- Meets the requirements of the various German Technical and Scientific Association for Gas and Water (DVGW) regulations
- Also approved by other certification institutes such as KIWA, BSI Kitemark, British Gas, Gaz de France, NF, SVGW
Fitness for drinking water is confirmed by the DVGW type examination certificates DV-7411AO2008 (copper fittings) and DV-7401AS2290 (gunmetal adapter fittings). This is also confirmed by the Austrian conformity registration certificate no. R-15.2.3-20-17025 for the 4000 series and R-15.2.3-20-17026 for the 5000 series.
Datasheets(X)
- Drinking water installations DIN EN 806 and DIN 1988
- Natural gas installations DIN EN 1775 and DVGW G 600 (TRGI)
- LPG installations German Technical LPG Rules (TRF)
- Heating oil utilities DIN 4755 (German Technical Rules for the Installation of Oil Burning Systems – TRÖ)
- Hot water heating systems DIN EN 12828
- Local and district heating pipelines, DIN 4747
- Thermal solar collectors
- Water-circulation-based room cooling equipment
- Air Conditioning and Refrigeration (ACR)
- Compressed air
- Systems for distributing technical and medical gases
- Rainwater harvesting systems, DIN 1989
- Extinguishing lines, “wet” DIN 14462
- Sprinkler systems “wet” VdS CEA 4001
- Industrial and process water
- Sewage lifting plants
 | |
Nominal diameter | 1/4 in |
Nominal diameter 2 | 1/2 in |
Length (a) | 20 mm |
Connection thread | R 1/4 x G 1/2 inch |
Connection type | 1. connection cylindrical female thread (Rp), 2. connection cylindrical female thread (Rp) |
Width across flats (S/S1) | 0 - not applicable |
Material | Red bronze - gunmetal |
Surface | Plain |
Last viewed
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Charger ALG 12 volt BASIC M-CUBE
VARIFIX® frame bracket For attached assembly of C-mounting rails (longitudinal, transverse, diagonal)
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Slotted cheese head DIN 84, brass, nickel-plated (E2J)
Work dungarees
Half-head strip nail, 34°, with smooth shaft Steel, plain
Connecting cable for LED linear plug-in lights
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive