Screw-in sleeve for furniture connectors
Sleeve, furniture construction, series S
SLEV-(F.CON-SERIE-S)-ZN-M6
Register now and access more than 125,000 products
- Suitable for SM 10, SE 15 and SL 15 bolt furniture connectors
- Self-tapping male thread
- Steel/steel connection can be loosened as many times as necessary
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc plated |
Drill hole diameter | 10 mm |
Thread type | Metric thread |
Thread dimension (G1) | M6 |
Length (L1) | 12 mm |
Nominal diameter (G2) | 12 mm |
Head diameter (G3) | 12 mm |
Last viewed
Manual screw tap, third tap Ruko hand tap HSCo DIN 352 third tap
Split pin ISO 1234 A4-70 stainless steel, plain
1/4-inch socket wrench insert hexagon, with magnet
Timing tool set 2 pieces, for FCA/Opel 2.2 16V twin cam, petrol (chain)
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Pipe cable lug with narrow flange
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Heat-shrink crimp connector, HIGH-END ring connector
Threaded fitting