Screw tap, manual, second tap Ruko hand tap HSCo DIN 352 second tap
Hand tap HSCo DIN 352 intermediate Ruko
HNDTAP-RUKO-230080E-2-HSS-CO5-M8X1,25
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M8 |
Pitch | 1.25 mm |
Length | 56 mm |
Thread length (metric thread) | 18 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Clamping pin/clamping sleeve
Hexagonal bolt with shank
UV 50 sun protection lotion
Service tool case Made of HDPE, mobile
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon nut, type B/A4 DIN 934 A4 stainless steel, with washer, in accordance with DIN EN ISO 7089 (DIN 125), A4 stainless steel
Hexagonal bolt with shank
Hammer drill bit Plus Quadro-S
Protective glove MultiFit Nitrile
Stirrup handle Nylon