Screw tap, manual, second tap Ruko hand tap HSCo DIN 352 second tap
Hand tap HSCo DIN 352 intermediate Ruko
HNDTAP-RUKO-230100E-2-HSSE-CO5-M10X1,50
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M10 |
Pitch | 1.50 mm |
Length | 70 mm |
Thread length (metric thread) | 24 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Test connection for tube connector female thread with cover
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexalobular-type cheese head screw ISO 14579, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Protection sleeve
Bar handle with blind hole thread
Tool assortment 37 pieces in system case
Pan head tapping screw with flange
Round head screw with square neck DIN 603, steel 4.8, zinc-plated, blue passivated (A2K)
Partial exoskeleton Ottobock CX Cool Sleeves cool sleeve arm