Screw tap, manual, second tap Ruko hand tap HSCo DIN 352 second tap
Hand tap HSCo DIN 352 intermediate Ruko
HNDTAP-RUKO-230140E-2-HSSE-CO5-M14X2,00
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and alloyed steels up to 1000 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M14 |
Pitch | 2 mm |
Length | 80 mm |
Thread length (metric thread) | 30 mm |
Material | High-speed steel with 5% cobalt content |
Thread type | Metric thread |
Last viewed
Ducting clamp Part 1 – Light series
Safety boots, S2
Low-cut safety shoes, S3
Countersunk screw with hexalobular head
VARIFIX® Systemfix 41 quick fastener With threaded rod
Hexalobular-type cheese head screw, low head ISO 14580, steel, strength class 8.8, zinc-nickel-plated, silver (ZNSHL)
Cylindrical pin, hardened ISO 8734 steel plain, type A hardened, tolerance class m6
Drawer cabinet BASIC
Slide wax
Car zinc adhesive weight From the original equipment for VW, Opel and Volvo