Screw tap, manual, second tap Ruko hand tap HSS DIN 352 left-hand thread second tap
Hand tap HSS DIN 352 l.-hnd thread intermediate Ruko
HNDTAP-RUKO-230030LI-2-HSS-M3X0,50
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M-L3 |
Pitch | 0.50 mm |
Length | 40 mm |
Thread length (metric thread) | 10.0 mm |
Material | HSS |
Thread type | M-L |
Last viewed
Blind rivet, open, with break mandrel and countersunk head ISO 15980, countersunk head, steel/steel
Protective glove, winter
Hexagonal bolt with shank
Sliding door fitting guide roller SB 20 E
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Neon high-visibility winter trousers, class 2
Twist drill bit, metal Ruko DIN 338 HSS-G black oxidised
Hygienic design ball-head screw
Inflatable Amo bag air cushion
EPDM sealing tape Outdoors