Screw tap, manual, second tap Ruko hand tap HSS DIN 352 second tap
Hand tap HSS DIN 352 intermediate Ruko
HNDTAP-RUKO-230520-2-HSS-M52X5,00
Register now and access more than 125,000 products
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M52 |
Pitch | 5.00 mm |
Length | 180 mm |
Thread length (metric thread) | 75.0 mm |
Material | HSS |
Thread type | Metric thread |
Datasheets(X)
Last viewed
T-piece, reduced with solder connection EN1254, copper, 5130R
Workbench PRO WUS 1
Buzon flat joint cross for terrace supports
Hook-and-loop backing pad For woven hook-and-loop discs and nylon abrasive discs in dia. 80 mm
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Nut for T slots
Countersunk tapping screw, shape C with Z recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3769
Sanding belt, fabric VSM XK870X
