Screw terminal with eye
Screw mounting eye terminal stainless steel A4
EYETRML-F1X19-A4-D8
Register now and access more than 125,000 products
- For mounting wire ropes 1x19
These products have not been developed and manufactured as slings or load-bearing equipment.
Therefore, they are not permitted for use as lifting gear, slings or load-bearing equipment, particularly within the scope of application defined by Machinery Directive 2006/42/EC.
Datasheets(X)
CAD data (available after login)
 | |
Material | Stainless steel A4 |
Surface | Plain |
RoHS-compliant | Yes |
Suitable for | Wire rope with d 8 mm |
Diameter of hole (d1) | 16 mm |
Terminal diameter (d2) | 30 mm |
Eye width (d3) | 13 mm |
Internal diameter (d4) | 9 mm |
Length (l1) | 121 mm |
Eye length (l2) | 69 mm |
Last viewed
Hexagon socket set screw with pin ISO 4028, A4 stainless steel, 21H, plain
OrgaWork desk substructure drawer
Natural rubber wrapping tape anthracite For FLEXEN® S2 rubber foam heat insulation
PURlogic® Fast 2-component frame foam
Red brass extensions With DVGW (German Technical and Scientific Association for Gas and Water) GW 393 approval (sizes from ½ inch x 17.5 mm)
Hexagonal bolt
Low-strength pipe and thread sealant with PTFE
Sabre saw blade, construction, three stars For cast iron piping
Locking system, DPS
Hexagonal bolt with shank ISO 4014, steel 10.9, plain