Screw with flattened half round head and collar with hexagon socket
DIN 34805-2 st 010.9 zinc flake silver TX
SCR-DIN34805/2-010.9-TX30-(ZFSHL)-M6X45
Register now and access more than 125,000 products
Increase in assembly productivity
When elements are joined using hexalobular (TX) fasteners, the force is transmitted over a large surface area across the flanks of the drive rather than being centred on one point, as is the case with hexagon socket drives, for example. This has a number of advantages:
- Reduced tool wear
- Tool does not slip because force is distributed optimally
Due to their head geometry, these screws can only be subjected to limited loads, see DIN EN ISO 898-1
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M6 |
Length (l1) | 45 mm |
Head diameter (dc) | 10.1 mm |
Head height (k1) | 3.3 mm |
Internal drive | TX30 |
Standards | DIN 34805-2 |
Material | Steel |
Property class | 010.9 |
Surface | Flake zinc silver |
Head type | Button head with collar |
Drive type | Internal hexalobular |
Thread type | Metric thread |
Product class | A |
RoHS-compliant | Yes |
Last viewed
Wire cable barrel terminal with nut, left-hand thread
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Slotted countersunk head screw DIN 963, brass, plain
Cable ties, heat-stable +130°C
Slide hammer for internal pullers with M7 and M10 thread
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
System workshop trolley BASIC 8.4
Hexagon nut, low profile with fine thread
ASSY® 4 Isotop roofing screw Steel zinc plated double thread cylinder head