Screw with flattened half round head with hexagon socket, imperial
ASME B18.3 stainless steel 18-8 plain UNF
SCR-BUT-SOC-(18-8)-1/4_28X3/4
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with A2 stainless steel. The mechanical properties are based on ASTM F835
Screws only suitable for limited loading, see also ASME 18.3 Table 3 and ASTM F835 Table 3 Point A
Datasheets(X)
 | |
Nominal diameter | 1/4 in |
Length | 0.75 in |
Head diameter | 0.375 in |
Head height | 0.437 in |
Internal drive | HS5/32 inch |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Number of thread starts per inch | 28 |
Last viewed
Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Safety boots, S3
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Flat blade fuse MINI Silver
Cleaning brush For concrete and REBAR with M8 connecting thread WIT-RB
Triangular Spoon scraper With wooden handle
O-ring, metric
K Plus insulation pipe clamp With separate insulation part
Castellated nut DIN 935, steel 8, zinc-plated, blue passivated (A2K)
Cylinder tapping screw, C shape with hexagon socket