Screw with flattened half round head with hexagon socket, imperial
ASME B18.3 stainless steel 18-8 plain UNC
SCR-BUT-SOC-(18-8)-6_32X7/16
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
18-8 is comparable with A2 stainless steel. The mechanical properties are based on ASTM F835
Screws only suitable for limited loading, see also ASME 18.3 Table 3 and ASTM F835 Table 3 Point A
Datasheets(X)
 | |
Nominal diameter | 0.138 in |
Length | 0.4375 in |
Head diameter | 0.262 in |
Head height | 0.073 in |
Internal drive | HS5/64 inch |
Material | Stainless steel AISI 304, 18-8 |
Surface | Plain |
Number of thread starts per inch | 32 |
Last viewed
Cross cabinet hinge, heavy-duty
Hexagon head sealing plug with collar DIN 910, A4 stainless steel, plain
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Washer with round hole, mainly for wood construction DIN 440, A4 stainless steel, plain
Perforated single guide rail For redoslide M15-HE and M15-HC furniture sliding door fitting
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Heat-resistant crepe masking tape +120 °C