Screw with flattened half round head with hexagon socket, imperial
ASME B18.3 steel alloy plain UNC
SCR-BUT-SOC-ALLOY-(PL)-8_32X1/2
Register now and access more than 125,000 products
1 INCH (in) = 25.4 mm
The "alloy" strength class is comparable with the metric strength class 12.9
The hexagon socket screws according to ASME B 18.3 have no strength class designation on the head as they only have one strength class according to the ASTM F835 mechanical properties.
Screws only suitable for limited loading, see also ASME 18.3 Table 3 and ASTM F835 Table 3 Point A
Datasheets(X)
 | |
Nominal diameter | 0.164 in |
Length | 0.5 in |
Head diameter | 0.312 in |
Head height | 0.087 in |
Internal drive | HS3/32 inch |
Material | Steel |
Surface | Plain |
Number of thread starts per inch | 32 |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Application device
T-shaped push-in fitting with female thread
Work jumper Sweatshirt JN040
Twist drill bit assortment HSCo DIN 338 type RN Oxide 19 pieces
Compartment dividers For system drawers
Threaded fitting, stainless steel, with ball joint
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
Hexagonal bolt with shaft, SB fittings, DIN EN 15048-1 ISO 4014, A4-70 stainless steel, plain, with nut ISO 4032