Screwdriver PH short with round shank
Screwdriver PH round blade short
SCRDRIV-PH-KNIRPS-PH2X25
ZEBRA
Register now and access more than 125,000 products
Small, but with many strengths
- For hard-to-reach and narrow areas due to the extra short shank
- Robust round shank, which has been brushed chrome-plated to protect against corrosion
- Quick identification of the right size using the Würth colour code on the shank
- Black point tip for the best possible fit in the screw
- Tip finished according to the DIN 5260-PH and ISO 8764-PH standards for PH screwdrivers
- Complies with the DIN 5262 and SMS SS 2831 standards
Fits comfortably in your hand
- Fatigue-free working with the 2C handle with hard core and soft, non-slip surface
- Fast-turning zone and hard material in the lower part of the handle enable quick turning using the index finger and thumb once the screw is loosened
- Quick and easy identification with the shank symbol and size printed on the handle
Tip size | PH2 |
Blade length (A) | 25 mm |
Handle length (B) | 62 mm |
Handle width (C) | 31 mm |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Time-Sert® drill bit
BASIC 8.8 system workshop trolley
W-CONNECT module with Bluetooth function
VRS-F ring bolt with key
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Knife blade Martor large special blade no. 104
Crimping tool 360° insertion For insulated and uninsulated wire end ferrules
Wire end ferrule with plastic sleeve according to DIN 46228 Part 4
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Helical insert W.TEC® INSERT COIL Free Running fine thread
