Screwdriving tool For stair bolts
Screwing tool for 1/2 inch hanger bolts
SPN-HNGBLT-1/2IN-M8
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
No screwing in or additional adjustment of screw-in parts into nut required
- The three threaded rollers automatically grip positively into thread when screwing in. When unscrewing, the threaded rollers open automatically and release the thread
- Can be used with 1/2" square drive for a ratchet screwdriver or with an adapter for an electric screwdriver
Notice
Not suitable for impact screwdrivers.
Product information
Datasheets(X)
Application area
For screwing and unscrewing stud screws, threaded rods and threaded pieces
Suitable for screw | M8 |
Diameter (Ø) | 25 mm |
Length | 38 mm |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
4KS profile thumbturn cylinder
Mounting set For tubular frame fittings on a long plate
EPS profile thumbturn cylinder
Zinc clip-on wheel weight For car aluminium rims
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Safety boots S3
Installation accessories for 3D hinges
Hexagonal bolt
Low-cut safety shoes, S2