Sealing ring, aluminium, shape A
DIN 7603 aluminium, shape A
RG-SEAL-DIN7603-ALU-A-5X9X1
Register now and access more than 125,000 products
- An aluminium ring can be used anywhere (except in the presence of some strong acids) due to its corrosion resistance.
- Via special preheating, the metal ring's structure softens further so that, when under pressure, it can embed itself into all the uneven areas of the parts to be screwed together.
When using the sealing rings, you should be aware that the dimensions are specified in the inner and outer diameter – if the space is tight, the inner diameter is decisive, as a 10x12 washer can be replaced with a 10x14 or even a 10x16 washer, for example.
Datasheets(X)
CAD data (available after login)
 | |
Material | Aluminium |
Surface | Plain |
Form | A |
Nominal size | 5 x 9 mm |
Internal diameter (d1) | 5.2 mm |
Outer diameter (d2) | 8.9 mm |
Thickness (h1) | 1.0 mm |
Corresponds to original spare part number | VW/Audi: N.013 802.3 |
Max. temperature resistance | 200 °C |
DIN | 7603 |
Last viewed
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
ISO insert holder with S clamping system for CC indexable inserts
Countersunk screw with hexalobular head
Round bar
Raised countersunk tapping screw, C shape with Z recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, with Z cross recess.
L-shaped push-in fitting with hexagon drive
Façade construction screw Faba® type BZ with hexagon head and sealing washer
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Work dungarees
Retrofit step For runged aluminium single-section ladders