Sealing tape VKP^® BASIC

Name: Sealing tape VKP ® BASIC
Brand: Würth
SKU: 0875120018

Sealing tape, VKP basic
SEALTPE-(VKP-BASIC)-(20/12-20)-BLA-6,5M
VKP

Art.-no. 0875120018

EAN 4045727497067

All versions

Specification

Waterproofed, pre-compressed BG2 sealing tape with tested resistance to driving rain up to 300 Pascal.

Tested tape quality in accordance with DIN 18542-BG2

Can be used up to a building height of 20 m

High level of safety due to fulfilment of all BG2 test parameters

In addition to BG2: tested direct resistance to weathering and UV

Increased safety and extended range of applications thanks to additional testing

Prevention of complaints and cost-intensive re-working

High tape tolerance

The tape seals reliably even with joint tolerances

Cost saving due to the use of few tape sizes

Time-saving application

No pre-treatment with primer is required

No use of processing tools

Pre-compressed and self-adhesive

The pre-compressed, one-sided self-adhesive VKP Basic sealing tape seals joints reliably and permanently in a single step.

After the compression is released, the sealing tape develops a resilience that presses firmly against the joint edges and compensates for uneven areas of the joint.

Depending on the installation period, the non-adhesive side develops a slight anchoring on the adjacent building material.

Notice

Select the correct tape size:

1. Define the joint widths from the structure and classify in the "resistance to driving rain" scale

2. Then select the required tape size

3. Select the art. no. according to the tape colour

4. Define the roll quantity

The expansion speed of VKP Basic depends on the temperature. The tape's expansion behaviour is not subject to any particular specification and is based only on empirical values. The tape's reset time depends on the storage and processing temperature. The following applies: The longer the storage times and the lower the processing temperature, the longer the reset times.

In high temperatures, store the tape in a cool location; in low temperatures, store in a warm location.

** Only for installation resistant to driving rain.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

For sealing against the effects of wind, sunlight and rain and for preventing heat loss in accordance with the stipulations of the Energy Conservation Ordinance and the RAL Quality Association. Can be exposed to direct weathering.

In construction:

Expansion joints, window connections, sealing between prefabricated parts, partition walls etc.

General industry:

Container construction, air-conditioning units, machine and apparatus construction etc.

Technical information

Colour	Black
Chemical basis	Fine open-cell polyurethane foam
Width	20 mm
Min./max. joint width for watertightness in driving rain	12-20 mm
Length of roll	6.5 m
Min. resistance against driving rain (pressure)/conditions	300 Pa / in accordance with DIN 18542-BG2
Building material class/conditions	B2 - Normally inflammable / in accordance with DIN 4102
Ultraviolet resistance	Yes, when installed to be resistant to driving rain
Min./max. temperature resistance	-30 to 90 °C
Shelf life from production	18 Month
Conditions to maintain shelf life from production	at 5°C to 25°C

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

PURlogic<SUP>®</SUP> Top single-component gun foam

PURlogic® Top single-component gun foam

GUNFM-1C-PURLOGICTOP-CONCGREY-500ML

Art.-no. 0892142

1-component gun foam for a variety of applications

PURlogic® Top single-component gun foam

GUNFM-1C-PURLOGICTOP-IVORY-500ML

Art.-no. 08921421

1-component gun foam for a variety of applications

x 15 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).