Sealing washer with weather-resistant EPDM seal
Sealing washer stainless steel A2 plain
WSH-EPDM3-A2-D14MM-F.SCR5,5
Register now and access more than 125,000 products
- EPDM gasket vulcanized
- Cured-on elastomer seal
Würth sealing washers improve the dynamic strength of connections
Datasheets(X)
 | |
Outer diameter (d2) | 14 mm |
Suitable for | Screw diameter 5.5 mm |
Gasket thickness (h1) | 3 mm |
Internal diameter of the seal (d1) | 4.0 mm |
Internal diameter (d3) | 6 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Material of sealing ring | Ethylene propylene diene terpolymer rubber EPDM |
Last viewed
Counter nut, brass PG
Hexagon nut, low profile, with clamping piece (non-metal insert)
3/8 inch socket wrench insert metric, hexagon, short
Hexagonal bolt with flange
Countersunk screw, type SK/A4 — cotter-pin installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
Lock plate with two tabs
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Refuse bag Without pull tie
Chemical protective glove chloroprene
Strapping clip, phosphated For Spannfix strapping system