Securing sleeve
Fixing sleeve steel zinc plated
DWL-(A0K)-30-8X70
Art.-no.
090508 70
EAN 4011231850230
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
For quick and economic mounting of light attachment parts in all solid materials, galv. steel
- Quick, easy installation
- Hardened spring steel
- Component is held by the collar
- Immediate load-bearing capacity
- For use in push-through installation
- Better thermal properties than polyamide anchors
Application area
Stop bars
Drill the hole
Knock in securing sleeve with mason's mallet until flush
Product information
Datasheets(X)
Application area
- For secondary fastening in interior finishing
- Outdoors for secondary attachments that are only required for short periods, e.g. building security
- Can be used in concrete ≥ B25, solid brick, solid sand-lime brick, hard natural stone
Anchor diameter | 8 mm |
Length (l) | 70 mm |
Max. attachment height (d a) (da) | 30 mm |
Embedding depth (h s) | 40 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Edge clearance (a r) | 50 mm |
Centre-to-centre distance (a) | 80 mm |
Minimum component thickness (d) | 80 mm |
Drill hole depth (t) | 45 mm |
Hole diameter in component (d Bau) | 8.8 mm |
Performance data | ||||
Anchor diameter [mm] | 6 | 8 | ||
Solid brick | 0,2 | 0,6 | ||
Solid sand-lime brick | 0,25 | 0,65 | ||
Recommended load | Concrete ≥ C20/25 | Frec. [kN] | 0,3 | 0,75 |
Characteristic values | |||
Nominal drill∅ | d0 [mm] | 6 | 8 |
Through hole in attachment part | df [mm] | 6,8 | 8,8 |
Sleeve ∅ (untensioned) | [mm] | 6,8 | 8,8 |
Axis distance | s ≥ [mm] | 240 | 240 |
Edge distance | c ≥ [mm] | 80 | 80 |
Drill hole depth | h1 ≥ [mm] | 35 | 45 |
Setting depth | hnom ≥ [mm] | 30 | 40 |
Minimum component thickness | hmin ≥ [mm] | 60 | 80 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!