Self-tapping screw with flat head Sheetite®
SHEETITE DBS steel zinc plated flat head TXP
SCR-PANHD-TSS-TXP10-(A2K)-M3X6
SHEETITE
Register now and access more than 125,000 products
Efficient connection of (thin) sheets
- Direct screwing
- Optimised capacity thanks to round shaft cross-section
- Flexible pre-punch design
- Improved hole finding thanks to rounded tip
- Low tapping torques
- Process-reliable assembly
- No cutting or processing of the thread required
- Play-free and self-locking thread seating
- Toothing under the head for increased breakaway torque
Datasheets(X)
CAD data (available after login)
For a secure connection in thin sheet metal (up to approx. 520 N/mm²)
Thread type x nominal diameter (d1) | M3 |
Length (l1) | 6 mm |
Head diameter (dk) | 5.6 mm |
Head height (k1) | 2.4 mm |
Head type | Flat head |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Internal drive | TX10 |
RoHS-compliant | Yes |
Locking device operating principle | Serration |
Locking function | Locking against self-loosening by mechanical interlocking |
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Hexagon nut, low profile, with clamping piece (non-metal insert)
Multi-fibre structural adhesive reinforced with fibreglass
Refill set 10 pieces
System box
Ducting clamp Part 2 – Heavy series
Work trousers
EPS profile thumbturn cylinder
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)