Self-tapping thread insert with cutting slot
Thread insert w.cutting slot stainless steel plain
THRINRT-SLFCUT-SL-1.4305-M6X12MM
Register now and access more than 125,000 products
- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting effect due to sharp edges and interrupted threads of the male thread
- The front threads are bevelled for easier cutting and insertion
- The cutting slot keeps the thread inserts anchored even during strong vibrations or shaking of the workpiece.
- Made of stainless steel 1.4305
Datasheets(X)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- For repairing torn-out threads
- Usual applications:
- For light metals and metals with a strength up to approx. 400 N/mm²
- For cast iron with hardness up to approx. 220 HB
- Plastic and fibreglass-reinforced plastic
(Tests on the original component are recommended, particularly near edges.)
 | |
Material | Stainless steel A1, 1.4305 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (d) | M6 |
Length (L) | 12 mm |
Outer diameter x pitch (D) | 9 x 1 mm |
Min./max. drill hole diameter | 8.2-8.6 mm |
Last viewed
KL draw bolt For M12-M63 and PG9-PG48 hole punchers
Countersunk screw with hexagon socket head
Screw, flattened half round head, with hexagon socket assortment 1,000 pieces
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Hexagonal bolt with thread up to the head ISO 4017, brass, plain
Suction lifter With two rigid heads
L-shaped push-in fitting with hexagon socket
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Fuel canister, 5 l With two discharge pipes for petrol and diesel
Slotted headless screw with flat point DIN 427, A1 stainless steel, plain