Self-tapping thread inserts with cutting hole
Thread insert with tapping hole steel zinc plated
GWDEINSA-SSHND-BO-(DSP)-M10X10MM
Register now and access more than 125,000 products
- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting performed by 3 cutting holes
- Thick walls withstand higher forces during thread cutting. This allows the inserts to be used in materials which are more difficult to machine
- Short and long version available in every diameter
- Chrome(VI)-free zinc thick film passivation for good corrosion protection (corrosion resistance in salt spray test according to DIN EN ISO 9227-NSS: 72h white rust/120 red rust)
Datasheets(X)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- For repairing torn-out threads
- Short versions ideal for thin materials
- Usual applications:
- For light metals with a strength up to approx. 450-500 N/mm²
- For cast iron with hardness up to approx. 240 HB
- Plastics and fibreglass-reinforced plastics
(Tests on the original component are recommended, particularly near edges.)
 | |
Material | Steel, case-hardened |
Surface | Zinc plated thick-layer passivation |
RoHS-compliant | Yes |
Thread type x nominal diameter (d) | M10 |
Length (L) | 10 mm |
Outer diameter x pitch (D) | 14 x 1.5 mm |
Min./max. drill hole diameter | 13.1-13.5 mm |
Last viewed
Protective glove, knitted and coated
Spacer stud, polyamide, hex, F/M
Safety shoe S3
Pipe and fastening clamp Multifix
Roll of emery cloth Roll of emery cloth
Colour – blind rivets Round pan head
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Jacket Planam Basalt
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262