Self-tapping thread inserts with cutting hole
Thread insert with tapping hole stain. steel plain
THRINRT-SLFCUT-DRL-1.4305-M8X9MM
Register now and access more than 125,000 products
- For producing high-strength screw connections and other threaded connections in materials with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- The inserts are simply screwed into a pre-drilled or pre-cast hole
- Cutting performed by 3 cutting holes
- Thick walls withstand higher forces during thread cutting. This allows the inserts to be used in materials which are more difficult to machine
- Short and long version available in every diameter
- Made of stainless steel 1.4305
Datasheets(X)
- Applications in the entire metal and plastic processing industry
- Thread reinforcement on tools with low shear strength, e.g. cast iron, aluminium alloys, plastics, hardwood etc.
- Short versions ideal for thin materials
- For repairing torn-out threads
- Usual applications:
- For light metals with a strength up to approx. 450-500 N/mm²
- For cast iron with hardness up to approx. 240 HB
- Plastics and fibreglass-reinforced plastics
(Tests on the original component are recommended, particularly near edges.)
 | |
Material | Stainless steel A1, 1.4305 |
Surface | Plain |
RoHS-compliant | Yes |
Thread type x nominal diameter (d) | M8 |
Length (L) | 9 mm |
Outer diameter x pitch (D) | 12 x 1.5 mm |
Min./max. drill hole diameter | 11.1-11.5 mm |
Last viewed
Hole saw spring Ruko 113218 ejector spring
CLIP-O-FLEX® tool tray
Jigsaw blade, wood, one star For plywood
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Jacket Planam Plaline
Key, high profile
Work dungarees
Hexagonal bolt with thread up to the head
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain
Slotted cylinder head screw ISO 1207, A2-70 stainless steel, plain