Senk-Blechschraube Form F mit Schlitz
DIN 7972 steel zinc plated counters. head shape F
SCR-CS-DIN7972-F-(A2K)-2,9X16
Register now and access more than 125,000 products
 | |
Material | Steel |
Surface | Zinc plated |
Form | F |
Nominal diameter (d1) | 2.9 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 5.5 mm |
Head height (k1) | 1.7 mm |
Internal drive | Slot |
Drive type | Slot |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Declaration of performance (EU-CPR) | No |
Shape of tip | F |
| Thread size | St 2.2 | St 2.9 | St 3.5 | St 3.9 | St 4.2 | St 4.8 | St 5.5 | St 6.3 | St 8 | St 9.5 |
| Min. sheet thickness (mm) | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | 2,1 |
| Max. sheet thickness (mm) | 1,8 | 2,2 | 2,8 | 3 | 3,5 | 4 | 4,5 | 5 | 6,5 | 7,5 |
| Pre-drilling diameter (mm) | 1,2 | 2,1 | 2,6 | 2,8 | 3,0 | 3,5 | 4,1 | 4,7 | 6,1 | 7,7 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Plus Quadro-L Vario hammer drill bit
System insert 8.4.1, striking tool
Wire cable terminal With fork
Prefilter Versaflo 3M
Handle plate on outer plate
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Screw, flattened half round head, with hexagon socket assortment 1000 pieces in system case 4.4.1. ISO 7380-1
Material lift box
Cable tie KBL INOX made of stainless steel AISI 304 V2A with ball closure
90° angled male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
