Separator
Separator tool
SEPRTL-SPNW75MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 14-75 mm |
Width of clamping jaw (B) | 115 mm |
Spindle length (C) | 170 mm |
Min./max. hole distance (E) | 76-139 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M10 |
Last viewed
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with metallic sealing edge, shape B
Hexagon socket set screw with truncated cone ISO 4026 A2 stainless steel 21H, plain
Solar mounting, WSF type A, variant 1 For wooden substructures, pre-assembled, A2 stainless steel with special coating
Tool case 32 pieces in system case 8.4.2.
Mechanic's glove
Hexagon nut, inch
Ducting clamp Part 1 – Light series
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive