Series 4000 plug-in nipple with comfort connection for PU pneumatic hoses
Nipple, series 4000
NPL-PN-S4000-SL-PU-11X16MM
Art.-no. 0699410411
EAN 4048539290079
Register now and access more than 125,000 products
- High flow rate of up to 3,900 l/min and a maximum operating pressure of 16 bar allows optimal power delivery for compressed air consumers
- Hardened steel nipples ensure maximum load capacity and a long service life
- Airtight connections ensure low energy use and high efficiency
- Exposed surfaces are chrome plated, nickel plated or zinc plated and offer high corrosion resistance and protection under demanding conditions
- Series 4000 fittings comply with the European Standard 10.4 and are compatible with other pneumatic fittings
Unscrew locking sleeve and push over the hose.
Then slide hose up over grommet as far as possible while twisting back and forth slightly.
Then screw on the locking bush as far as possible.
Datasheets(X)
Material | Steel |
Suitable for hose internal diameter | 11 mm |
Suitable for hose external diameter | 16 mm |
Length (L) | 54 mm |
Surface | Zinc plated |
Width across flats (SW) | 24 mm |
Max. pressure | 16 bar |
Flow capacity | 3900 l/min |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Akura 44 profile thumbturn cylinder
Tensioning washer DIN 6796, A2 stainless steel, plain, for screw connection
Twist drill bit HSCo DIN 340 type RN OXIDE
Square reflector, self-adhesive
Hexagon socket screw-in nut with collar DIN 908, steel, zinc-plated, blue passivated (A2K)
Checker plate box
Additional funct. 4KS seawater-resistant (SEW)
Half-visor for SH 3000 safety helmet
Bolt connector