Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)

Name: Hexagon socket set screw with ring cutter ISO 4029, steel 45H, zinc-plated, blue passivated (A2K)
Brand: Würth
SKU: 02540255

ISO 4029 steel 45H zinc plated
SCR-CUPPT-ISO4029-45H-IH1,3-(A2K)-M2,5X5

Art.-no. 02540255

EAN 4067992420854

All versions

Specification

Notice

Hardness class 45H corresponds to a hardness of 450 HV

ISO 4029 replaces DIN 916 | There is some similarity | Nominal diameters for M1.4, M1.8, M14, M18, M22 are removed | Hardness classes for stainless steels introduced.

Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.

Improper application is likely if set screws are welded, tightened and secured with nuts or subjected to bending. Any application of tensile stress is considered improper use and can result in malfunction.

Tip:

A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.

Technical information


Thread type x nominal diameter (d₁)	M2.5
Length (l₁)	5 mm
Ring cutter diameter (d₂)	1.2 mm
Internal drive (s₁)	HS1.3
Standards	ISO 4029
Material	Steel
Surface	Zinc plated
Hardness category	45H
Drive type	Hexagon socket
Shape of tip	Cup point
RoHS-compliant	Yes