Shackle similar to DIN 82101 shape A
Shackle straight WN82101 steel zn/hdg
SHKL-WN82101-A-(TZN)-3,15T-PIN27
Register now and access more than 125,000 products
Datasheets(X)
- Brackets and bolts made of high-strength steel, grade 4
- Threaded bolt for fast installation and removal
- Approved for lifting loads
- Minimum breaking load= 5 x the WLL
- Similar to DIN 82101 type A, deviation in the bracket diameter
- Certificates: 2.1 2.2 CE
 | |
Load capacity | 3.15 t |
Thread type x shackle bolt diameter | M 27 mm |
Shackle internal width (b1) | 38 mm |
Shackle external width (b2) | 88 mm |
Shackle diameter (d1) | 25 mm |
Internal shackle height (centre bolt) (h1) | 97 mm |
Design | Forged |
Material | Steel |
Surface | Hot dip galvanized |
Form | A |
Nominal size | 3 |
RoHS-compliant | Yes |
Last viewed
Single-cut tap for W.TEC® INSERT COIL helical inserts - shape D, made of HSS
Timing tool set 4 pieces, for FCA Group 2.0 JTS 165 PS, petrol
Twist drill bit, metal Ruko DIN 338 HSS-R black oxidised
Solid carbide end mill With Speedcut Aluminium corner radius, extra-long XL, optional, three cutting edges, uneven angle of twist gradient
Fully threaded hexagonal bolt and fine thread
Steel zinc nickel black pan head H
pias® drilling screw, countersunk head with AW drive
piasta® drilling screw, hexagon head A2 stainless steel with drill tip and moulded thread made of hardened steel
Finishing disc Useit® Superpad SG
Milling bit assortment/set Ruko 116002 10 pieces plain