Sheet metal conical drill bit HSS With two cutting edges
Sheet metal conical drill bit HSS CBN
SHTMETCONIDRL-HSS-SZ1-(D3-14MM)
ZEBRA
Register now and access more than 125,000 products
- CBN (cubical boron nitride), deep ground
- Stepless drilling and widening of holes within the diameter range of 3–61 mm
- No countersinking or pre-drilling required
- Burr-free drilling without causing the sheet metal to deform. Excellent heat conductivity for longer service life thanks to axial and radial CBN relief grinding
- Mounting shank with three-phase grinding
- With laser scale for easy identification of the required drilling hole diameter
- Speed table included
- Increase service life and cutting performance using drilling and cutting oil or cutting paste
Datasheets(X)
- For universal use
- Also suitable for drilling very thin sheets
Size | 1 |
Min./max. drill diameter | 3-14 mm |
Length | 58 mm |
Shank diameter | 6 mm |
Type description | HSS |
Cutting material | HSS |
Shank style | 3-face shank |
Last viewed
Snap ring shape SW for shaft
EU HSCo 90° TiAIN long countersink DIN 335C
Threaded fitting
Cheese head screw with hexagon socket ISO 4762/DIN 912, steel 12.9, plain, manufacturer HOLO-KROME®
Anti-germ coating
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
V-belt/V-ribbed belt/tensioning roller setting pin
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated