Sheet metal conical drill bit HSS With two cutting edges
Sheet metal conical drill bit HSS CBN
SHTMETCONIDRL-HSS-SZ2-(D5-20MM)
ZEBRA
Register now and access more than 125,000 products
- CBN (cubical boron nitride), deep ground
- Stepless drilling and widening of holes within the diameter range of 3–61 mm
- No countersinking or pre-drilling required
- Burr-free drilling without causing the sheet metal to deform. Excellent heat conductivity for longer service life thanks to axial and radial CBN relief grinding
- Mounting shank with three-phase grinding
- With laser scale for easy identification of the required drilling hole diameter
- Speed table included
- Increase service life and cutting performance using drilling and cutting oil or cutting paste
Datasheets(X)
- For universal use
- Also suitable for drilling very thin sheets
Size | 2 |
Min./max. drill diameter | 5-20 mm |
Length | 71 mm |
Shank diameter | 8 mm |
Type description | HSS |
Cutting material | HSS |
Shank style | 3-face shank |
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Smoke detector changing device For UDR 132/142 smoke and thermal switches
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Glazing packer
VDE snipe nose pliers DIN ISO 5745, IEC 60900
Window application nozzle For 300 ml + 310 ml metal cartridges (fine thread)
2-in-1 LED torch With magnet and clip
Seat protector, truck
Push-rod clamp with variable clamping height
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain