Sheet metal conical drill bit HSS, titanium nitride
SHTMETCONIDRL-HSS-TIN-SZ1-(D3-14MM)
Art.-no. 069402514
EAN 4011231603799
Register now and access more than 125,000 products
Titanium nitride for powerful performance
- CBN (cubical boron nitride), deep ground
- Cutting speed and feed increase by up to 100 %
- Service life is doubled or even quadrupled
For universal use
- Stepless drilling and widening of holes within the diameter range of 3-61 mm
- Also suitable for drilling very thin sheets
Easy to use
- No countersinking or pre-drilling required
- With laser scale for easy identification of the required drilling hole diameter
- Speed table included
Two cutting edges and drive arbor with three-phase grinding
Datasheets(X)
Size | 1 |
Min./max. drill diameter | 3-14 mm |
Length | 58 mm |
Shank diameter | 6 mm |
Type description | HSS, titanium nitride |
Cutting material | HSS |
Shank style | 3-face shank |
| Typical speed values for the sheet metal conical drill bit | |||||
| Material | Non-ferrous metals | Stainless steel sheet metal Nirosta, A2 | Plastics, thermosetting plastics, thermoplastics | Soft sheet steel, e.g. 14-37 steels | |
| Sheet thickness | 0.1-6 mm | 0.1-2 mm | up to 10 mm | 0.1-4 mm | |
| Size | diam. mm | n = rpm | n = rpm | n = rpm | n = rpm |
| 1 | 3-14,0 | 2000-1500 | 600-400 | 3000-2000 | 800-500 |
| 2 | 4-20,0 | 1500-800 | 400-200 | 2000-1500 | 600-300 |
| 3 | 16-30,5 | 1000-500 | 200-100 | 1500-1000 | 400-200 |
| 4 | 24-40,0 | 500-300 | 100-80 | 1000-500 | 300-150 |
| 5 | 36-50,0 | 300-200 | 50-80 | 500-200 | 200-100 |
| 6 | 40-61,0 | 200-100 | 50-25 | 300-150 | 100-50 |
| 8 | 4-31,0 | 1000-500 | 200-100 | 1500-1000 | 400-200 |
Last viewed
Hexagon bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon nut ISO 4032 steel 10, plain
Reamer Square
1C liquid plastic fleece inlay roll with butyl strips
Punching tool set, eight pieces. for Ford washer nozzle opening
2C cutter knife with locking wheel and blade storage
System stacking cabinet for ORSY system case 8.4.3
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 Steel 8.8U, hot-dip galvanised