Shell end mill HSCo DIN 1880 type N TiAlN - SHELLENDMILL-DIN1880-HSCO-TIALN-D40,0MM

Shell end mill HSCo DIN 1880 type N TiAlN

Name: Shell end mill HSCo DIN 1880 type N TiAlN
Brand: Würth
SKU: 5443601101

Shell end mill HSCo DIN 1880 Z6-10 type N TiAlN
SHELLENDMILL-DIN1880-HSCO-TIALN-D40,0MM

Art.-no. 5443601101

EAN 4055375880746

All versions

Similar products

Prices for customers after login

Shell end mill HSCo DIN 1880 type N TiAlN

Art.-no. 5443601101

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Recommended for milling difficult to machine materials up to a strength of 1,300 N/mm² and rust- and acid-resistant steels, titanium alloys etc.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents


Product code	3077
Diameter (d1 (js 16))	40 mm
Height (b (k16))	32 mm
Bore diameter (d2 (H7))	16 mm
Number of cutting edges (Z)	6 PCS
Material to be processed	Steel, Cast metal, Stainless steel, Titanium, Copper, Brass, Plastic
Standards	DIN 1880
Cutting material	HSCo
Surface	TiAlN
Twist angle	30°
Tool holding device	With crosswise and longitudinal slot DIN 138
Material of sub-group	General structural steels, Non-alloyed tempering steels < 1000 N/mm², Alloyed tempering steels < 1000 N/mm², Nitriding steels < 1300 N/mm², Grey cast iron, Malleable cast iron, Stainless steels < 850 N/mm², Stainless steels > 850 N/mm², Titanium, Titanium alloys, Copper, Brass, Plastics

Legend
E = emulsion		a_e = 0.1xd1
v_c = cutting speed [m/min]
f_z = feed per tooth [mm/t]		a_p = 1.5xd1
a_e = cutting thickness (radial)
a_p = cutting thickness (axial)
The suggested cutting values are reference values and must be adapted to the respective conditions.

Cutting values for roughing contour
For dia. 40 to dia. 80
Material designation	Tensile strength	Cooling	v_c	f_z
				Dia. 40 to dia. 80
General structural steels	< 500 N/mm²	E	45	0,100
General structural steels	500-850 N/mm²	E	37	0,088
Carbon steels	< 850 N/mm²	E	40	0,088
Carbon steels	850-1000 N/mm²	E	37	0,088
Unalloyed heat-treated steels	< 700 N/mm²	E	37	0,088
	700-850 N/mm²	E	32	0,088
	850-1000 N/mm²	E	24	0,088
Alloyed heat-treated steels	850-1000 N/mm²	E	24	0,088
Alloyed heat-treated steels	1000-1200 N/mm²	E	23	0,100
Unalloyed case-hardening steels	< 750 N/mm²	E	32	0,088
Alloyed case-hardening steels	< 1000 N/mm²	E	27	0,088
Alloyed case-hardening steels	1000-1200 N/mm²	E	24	0,100
Nitriding steels	< 1000 N/mm²	E	23	0,088
Nitriding steels	1000-1200 N/mm²	E	19	0,100
Tool steels	< 850 N/mm²	E	20	0,088
	850-1100 N/mm²	E	17	0,100
	1100-1400 N/mm²	E	15	0,100
High-speed steels	850-1200 N/mm²	E	12	0,100
Wear-resistant constructional steel	1350 N/mm²	E	10	0,100
Spring steels	< 1200 N/mm²	E	8	0,100
Stainless steels, sulphurated	< 700 N/mm²	E	16	0,088
Stainless steels, austenitic	< 700 N/mm²	E	13	0,088
Stainless steels, austenitic	< 850 N/mm²	E	10	0,088
Stainless steels, martensitic	< 1100 N/mm²	E	8	0,100
Special alloys	< 1200 N/mm²	E	5	0,100
Cast iron	< 180 HB	-	35	0,088
Cast iron	> 180 HB	-	27	0,088
Nodular graphite, malleable iron	> 180 HB	-	21	0,088
Nodular graphite, malleable iron	> 260 HB	E	15	0,088
Titanium, titanium alloys	< 850 N/mm²	E	9	0,100
Copper, low-alloy	< 350 N/mm²	E	53	0,157
Brass, short-chipping	< 600 N/mm²	-	53	0,157
Brass, long-chipping	< 600 N/mm²	-	48	0,157
Bronze, short-chipping	< 600 N/mm²	-	48	0,157
Bronze, short-chipping	650-850 N/mm²	-	37	0,157
Bronze, long-chipping	< 850 N/mm²	E	30	0,157
Bronze, long-chipping	850-1200 N/mm²	E	24	0,170

Cutting values for finishing contour
For dia. 40 to dia. 80
Material designation	Tensile strength	Cooling	v_c	f_z
				Dia. 40 to dia. 80
General structural steels	< 500 N/mm²	E	68	0,080
General structural steels	500-850 N/mm²	E	57	0,069
Carbon steels	< 850 N/mm²	E	57	0,048
Carbon steels	850-1000 N/mm²	E	45	0,048
Unalloyed heat-treated steels	< 700 N/mm²	E	57	0,048
	700-850 N/mm²	E	57	0,048
	850-1000 N/mm²	E	45	0,048
Alloyed heat-treated steels	850-1000 N/mm²	E	45	0,048
Alloyed heat-treated steels	1000-1200 N/mm²	E	38	0,054
Unalloyed case-hardening steels	< 750 N/mm²	E	57	0,048
Alloyed case-hardening steels	< 1000 N/mm²	E	45	0,048
Alloyed case-hardening steels	1000-1200 N/mm²	E	38	0,054
Nitriding steels	< 1000 N/mm²	E	45	0,048
Nitriding steels	1000-1200 N/mm²	E	38	0,054
Tool steels	< 850 N/mm²	E	57	0,048
	850-1100 N/mm²	E	38	0,054
	1100-1400 N/mm²	E	30	0,054
High-speed steels	850-1200 N/mm²	E	30	0,064
Wear-resistant constructional steel	1350 N/mm²	E	23	0,054
Spring steels	< 1200 N/mm²	E	23	0,054
Stainless steels, sulphurated	< 700 N/mm²	E	57	0,048
Stainless steels, austenitic	< 700 N/mm²	E	57	0,048
Stainless steels, austenitic	< 850 N/mm²	E	45	0,048
Stainless steels, martensitic	< 1100 N/mm²	E	38	0,054
Special alloys	< 1200 N/mm²	E	23	0,054
Cast iron	< 180 HB	-	57	0,048
Cast iron	> 180 HB	-	45	0,048
Nodular graphite, malleable iron	> 180 HB	-	45	0,048
Nodular graphite, malleable iron	> 260 HB	E	38	0,048
Titanium, titanium alloys	< 850 N/mm²	E	30	0,054
Copper, low-alloy	< 350 N/mm²	E	180	0,084
Brass, short-chipping	< 600 N/mm²	-	150	0,084
Brass, long-chipping	< 600 N/mm²	-	150	0,084
Bronze, short-chipping	< 600 N/mm²	-	150	0,084
Bronze, short-chipping	650-850 N/mm²	-	120	0,084
Bronze, long-chipping	< 850 N/mm²	E	120	0,084
Bronze, long-chipping	850-1200 N/mm²	E	98	0,092

Legend
E = emulsion		a_e = 0.5xd1
v_c = cutting speed [m/min]
f_z = feed per tooth [mm/t]		a_p = 1xd1
a_e = cutting thickness (radial)
a_p = cutting thickness (axial)
The suggested cutting values are reference values and must be adapted to the respective conditions.