Shield clamps without feet
Shield clamp without mounting foot
SHLDCLMP-F.SCRMNT-WO.MNTFT-(3-6MM)
Register now and access more than 125,000 products
- Suitable for cables from 1.5 to 20 mm in diameter
- Optimal cable shield contact
- Easy to install without additional tools
- Constant pressure is applied to the cable shield, eliminating the need for time-consuming tests and checks
- Not sensitive to vibrations and maintenance-free
- The optimised shape and dimensions make it easy to handle a large number of cables
- The shield clamp can be fastened using a screw or rivet
Datasheets(X)
 | |
Min./max. grip range | 3-6 mm |
Width | 11 mm |
Height | 16.2 mm |
Length | 8 mm |
Diameter of hole | 3.2 mm |
Last viewed
Hexagonal bolt with thread up to the head
Rigid steel-armoured pipe zinc-plated, Stapa-Gewinde-WESV For indoor use (low-corrosion environments)
Rivet for brake and clutch discs
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Sanding belt, fabric VSM KK711T
ASSY® 4 RCS fittings screw Steel zinc plated full thread raised countersunk head
Ducting clamp Part 3 – Double series
1/2-inch impact socket wrench insert hexagon, metric, long
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Split pin ISO/WN 1234 steel zinc-plated