Shim ring WN 988 A2 stainless steel plain
WN 988 stainless steel A2 plain
RG-SHIM-WN988-A2-80X100X2
Register now and access more than 125,000 products
As stainless steel shim rings are not part of DIN 988, there is no priming material on the market to meet the tolerances for the disc thickness according to DIN 988. The tolerances for the disc thickness are in accordance with DIN EN ISO 9445-1 for continuously cold-rolled stainless steel. Thus, the discs can also have a positive thickness allowance.
All other dimensions and tolerances comply with DIN 988.
Datasheets(X)
 | |
Standards | DIN 988, WN 988 |
Internal diameter (d1) | 80 mm |
Outer diameter (d2) | 100 mm |
Thickness (h1) | 2.0 mm |
Material | Stainless steel A2 |
Surface | Plain |
RoHS-compliant | Yes |
Last viewed
HSCo Longlife TiAlN+ red-ring machine tap for through holes DIN 371/376
Hexagonal bolt with shank DIN 931, steel 10.9, plain
Chemical injection mortar PURE EPOXY WIT-PE 1000
Threaded rod DIN 976-1, zinc-plated steel 10.9
Key rosette pair AL 30
Divider assortment Divider assortment with compartment rails and compartment dividers for system dimensions 8.8
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Straight weld fitting ISO 8434-1, zinc-nickel-plated steel
Safety shoe S1
Spindle-mounted round wheel brush drill Klingspor BRS 600 W