Welcome to Würth Aerospace Solutions For trade customers only

Shower pan Linear, flat

Shower board channel drainage flat
SHWRBRD-LINE-FL-BE-900X1200X80-CHAN800-

Art.-no. 5273220912
EAN 4058794034141
Prices for customers after login
Shower pan Linear, flat

Art.-no. 5273220912

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Floor-level shower unit with channel drain, slope on one side and integral drain/drainpipe.

Low installation height



Factory-fitted drain and drainpipe


Ready to connect. Fewer parts — easy to install



Bonded sealing membrane with 7 cm overlap


  • 100% watertight

  • Easy, reliable connection to the second sealing layer

  • No additional sealing strips required


General construction authority test certificate (ABP) relating to leak tightness


Safety tested for the overall system, i.e. shower pan, tile adhesive, sealing membrane, corner seals etc.



High strength


Suitable for barefoot and wheelchair use with a tile size of 2 x 2 cm or above



Fully removable siphon and filter


Easy to clean

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

Tileable substructure for floor-level showers.

Drain position

Back

Width x depth x height (B x T x H)

900 x 1200 x 80 mm

Gutter length x gutter width (L x G)

800 x 65 mm

Min. installation height

80 mm

Drain rate

0.5 l/s

Water-trap height

25 mm

Nominal width of DN outflow

DN 40 horizontal

Material

PS - Polystyrene

Material of waterproof strip

PP - Polypropylene

Material of channel-tray

Stainless steel

Volumetric weight

60 kg/m³

Gradient

1.8 %

Crosswise distance from centre of outlet to edge (Y)

52 mm

Longitudinal distance from centre of outlet to edge (X)

450 mm

Shower board height at the drain (S)

53 mm

Sealing overlap (Z)

70 mm

Resistance against

Alkali

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Full cover For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels

COV-CHAN-SFL-MAT-800

x 1 pcs
Full cover For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels

COV-CHAN-SFL-POL-800

x 1 pcs
Tile recess for super-flat shower channels

TLERECES-CHAN-SFL-800

Made from a single material - no separate installation clips/supports
x 1 pcs
Linear grid with fern design For flat line-drainage shower boards, super-flat line-drainage shower boards, super-flat shower channels

GRID-CHAN-SFL-FERN-800

x 1 pcs
Linear grid with wave design, flat/super flat For flat line-drainage shower board, super-flat line-drainage shower board, super-flat shower channel

GRID-CHAN-SFL-WAVE-800

For linear shower pan, flat, linear shower pan, super flat, shower channel, super flat
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Sound insulation mat

SOUINSUMAT-1250X1250X5MM

For isolating shower pans/shower channels
x 1 pcs
Flex fast-setting adhesive For installing shower boards and base elements

QCKADH-2,5KG-BUCKET

x 1 pcs
3D corner seals, 20 mm

SEALEDG-3D-20MM-LEFT

For professional sealing of the angle between the wall and the floor with the linear shower pan (sloping on one side), linear shower pan, flat
x 1 pcs
3D corner seals, 20 mm

SEALEDG-3D-20MM-RIGTH

For professional sealing of the angle between the wall and the floor with the linear shower pan (sloping on one side), linear shower pan, flat
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information